Seagate ST3750630AS Data Recovery
Zero Alpha Data Recovery provides professional data recovery services for the Seagate ST3750630AS, a 750GB enterprise-grade SATA hard drive from the Barracuda ES and 7200.11 family. These drives commonly suffer from clicking or beeping sounds (head failure), failure to spin up, not being detected in BIOS, and the well-known BSY or LBA0 firmware bug seen on certain SD15 firmware revisions. PCB issues such as burnt TVS diodes from power surges are also frequent on this model. We recover data from these drives every week and accept mail-in jobs Australia-wide and internationally.
Seagate ST3750630AS Common Problems
- Clicking, beeping or grinding noises – failed read/write heads or preamp failure
- Drive does not spin up – seized motor or PCB fault
- Detected by power but missing in BIOS – frequent firmware corruption on this series
- BSY (busy) state or LBA 0 issue – known firmware defect on 7200.10/7200.11/ES drives
- Burnt or shorted TVS diodes from overvoltage or incorrect power supply
- Media damage or cache corruption causing freezing, lag or slow access
ST3750630AS Data Recovery Caselog
20NOV25: This hard drive was mailed in from Adelaide South Australia. The customer reports it stopped detecting years ago. PCB: 100466824 REV C. We found the pcb has been fire damaged with a burnt chip. This caused a chain of events and damaged the heads inside also. Zero Alpha was able to recover all the data back for the customer.
Clicking Seagate ST3750630AS Data Recovery Caselog
11NOV25: This Seagate hard drive is Barracuda 7200.11 was clicking. Drive was showing flat line. Burn mark on motor.The hard drive was taking a long time to detect.Can not edit head map in the rom for this type of drive.Comes ready after 5 minutes and clicking. Family: 27, Moose. MRB on Head 1. HHD ID Edit in RAM.Reads.The drive times out,but works if you restart it and do hdd id edit in ram again.We recovered all the data.